Custom Laser Engraved Valve Tags

Description

Our Custom Laser Engraved Valve Tags are manufactured from Film-Stamped Impact Modified Acrylic, a more modern version of the industry standard Traffolyte.

Basically, our plastic valve tags are laser engraved and laser cut from a material that comprises of two bonded coloured layers of acrylic.

A thin top layer over a thicker base layer. Our standard thickness is 1.5mm / 0.059″, but 3mm / 0.12″ thickness is available as a custom option.

The base material was tested for flammability by the Underwriters Laboratories and is rated 94 HB on the UL 94 test.

Using a laser to remove the top layer, reveals the different coloured substrate.

The flexibility of the laser cutting and engraving process means that different text, information and serialisation can be easily added.

Text

• Single Character Alpha Numeric e.g. 0~9; A~Z
• 2 Character Alpha Numeric e.g. 01~99, AA~ZZ
• 3 Character Alpha Numeric e.g. 001~999, AAA~ZZZ
• Custom: Supply your text requirements in CSV file format.
• QR Codes: Supply your text requirements in CSV file format

Good chemical stability and suitable for indoor and outdoor use.

We have six Standard colours combinations available:

• Black with white text | Commonly used for Waste Effluents
• Green with white text | Commonly used for Potable Water
• Red with white text | Commonly used for Sprinkler or Firefighting Systems
• Yellow with black text | Commonly used for Gases
• Blue with white text
• White with black text

Choice of 12 different diameters: 20mm / 25mm / 30mm / 35mm / 40mm / 45mm / 50mm / 55mm / 60mm / 65mm / 70mm / 75mm

Resources for Laser Engraved Valve Tags

Laserables II material properties

BS 1710:2014 Specification for identification of pipelines and services

Need Something Similar to our Laser Engraved Valve Tags?

If you are looking for something different, then check out our Laser Engraved QR Coded Discs or Laser Engraved Panel Labels