Menu For The RDWorks Learning Lab Series

With Russ Sadler

Check out the following pages that cover the Complete RDWorks Learning Lab Series by Russ Sadler of Sarbar Multimedia.

Over the last 6 years, Russ has built up a formidable YouTube following for his RDWorks Learning Lab series which currently has over 230 videos.

The original RDWorks Learning Lab series on his “Sarbar Multimedia” YouTube Channel, follows Russ as he tries to make sense of his new Chinese laser machine and to sort out the truths, half truths and outright misleading information that is available on the web.

Six years later with over 4.5 million YouTube Views under his belt, Russ has become the go to resource for everything related to the Chinese CO2 laser machine user or wannabe user.

RDWorks Learning Lab Series of Videos
RDWorks Learning Lab Series of Videos

A Video Diary: Learning About Chinese Laser Cutting Technology 01

Check out Russ’s Early work based on his China Blue laser cutting and engraving machine.

Includes his “Chinese laser cutter tutorial” videos 01~06

Includes his “RDWorks Learning Lab Series” videos 01~50

A Video Diary: Learning About Chinese Laser Cutting Technology 02

Check out Russ’s Early work based on his China Blue laser cutting and engraving machine.

Includes his “RDWorks Learning Lab” videos 51~100

A Video Diary: Learning About Chinese Laser Cutting Technology 03

Check out Russ’s Early work based on his China Blue laser cutting and engraving machine.

Includes his “RDWorks Learning Lab” videos 101~150

A Video Diary: Learning About Chinese Laser Cutting Technology 04

Check out Russ’s Early work based on his China Blue laser cutting and engraving machine.

Includes his “RDWorks Learning Lab” videos 151~200

A Video Diary: Learning About Chinese Laser Cutting Technology 05

Check out Russ’s Early work based on his China Blue laser cutting and engraving machine.

Includes his “RDWorks Learning Lab Series” videos 201~250

Recommended

Why not try out one of our other video series such as:

The Tangerine Tiger Series where Russ has purchased a new 500 x 300mm, 50W laser machine from eBay with a view to modifying and upgrading it. In fact, he rips out the glass laser tube and high voltage power supply and replaces them with an RF laser source and PSU from Cloudray. Find out how the expensive RF laser source compares to a glass CO2 laser tube and prepare to get your hands dirty!


The Lightblade Learning Lab is a series of videos that Russ did for Thinklaser Limited based on using the Lightburn 4060 Laser Cutting and Engraving Machine. The Lightburn 4060 has a 400 x 600mm bed size and was supplied with a 60W EFR laser tube.


The Fiber Laser Series is all about Russ’s adventures and investigations with a 30 watt fibre laser, loaned to him by Dean at Lotus Laser Systems. If you are looking to engrave metal, without the fuss of using coatings such as Thermark, Cermark or Molybdenum Disulphide spray, then this is the series for you.


The Lightburn Software Series is probably the best generic laser cutting software available (I use it for almost all of my laser work). This series has tutorials, hints and tips as well as the occasional speed comparisons between it and RDWorks. My thanks to the team at Lightburn for allowing me to embed their videos.


The Top 10 Ranked RDWorks Learning Lab Videos. The ten most popular videos of the RDWorks Learning Lab Series by number of views.


The Concise RDWorks Learning Lab Series that condenses all of Russ’s work into an easy to follow encyclopaedia of laser knowledge.


DMCA.com Protection Status Follow @laseruser_com